Universal Audio OX User Manual

OX Amp Top Box Controls & Connectors 21
LINE / MONITOR Outputs (21)
The Left and Right LINE / MON outputs are for connecting OX to the analog line-level
stereo inputs of studio monitors, a computer audio interface, or other audio equipment.
Both ¼” jacks can accept balanced TRS (tip-ring-sleeve) or unbalanced TS (tip-sleeve)
connections.
OX’s front panel LINE OUT knob controls the level at these outputs. At the minimum
position (0), the outputs are off.
Note: Use only shielded line/instrument cables with these outputs. Don’t connect
unshielded speaker cables here.
Wi-Fi Address (22)
The hotspot name (SSID) and password for OX’s built-in wireless Wi-Fi network is printed
here. These login credentials are used when connecting the device running OX’s remote
control software application to the unit.
Note: Every OX unit as a unique hotspot name and password.
Tip: OX’s default hotspot name and password can be changed from within the
software OX app.

Universal Audio OX Specifications

General

Speaker Impedance	4, 8, 16 Ohms
Power Handling	150W RMS
Speaker Emulation	Yes
Microphone Emulation	Yes
Room Emulation	Yes
USB Audio Interface	No
MIDI I/O	No
Type	Reactive Load Box
Outputs	1 x 1/4" (line out)
Analog Inputs	1 x 1/4" (speaker in)
Analog Outputs	1 x 1/4" (line out)
Digital Outputs	1 x S/PDIF
Other I/O	1 x RJ45 (Ethernet)