Name: Universal Robots UR10
Brand: Universal Robots
Rating: 5 (1 reviews)

To Next Page

To Previous Page

of the message, error category, error code, error source, time, date and time stamp will be shown after opening

the log start entry. You can also press the “Open groups” button to open all grouped entries.

Example of a window showing warning and errors from a log start entry

By right-clicking on the Log entry and choosing “Error Default Timeline” or “Error Selection Timeline” a new

window will be displayed. It shows you the occurrence of errors over the time. Here you can switch the

displayed range of errors, change the type of chart and switch to an accumulated view.

Other manuals for Universal Robots UR10

Questions and Answers:

Need help?

Do you have a question about the Universal Robots UR10 and is the answer not in the manual?

General

Payload	10 kg
Reach	1300 mm
Degrees of Freedom	6
Weight	28.9 kg
Footprint	190 mm diameter
Repeatability	±0.1 mm
IP Classification	IP54
Programming	Polyscope graphical user interface
Joint Range	±360° on all joints
Power Consumption	350 W
Communication Interface	Ethernet, Modbus TCP
Safety Standards	EN ISO 10218-1
Operating Voltage	100-240 VAC, 50-60 Hz