Universal Robots UR10e Manual

NOTICE
First place the OLD part in the spare ESD bag, then take out the NEW part of the
ESD bag.
NOTICE
Do not place the ESD-sensitive part on nonconductive material or on metal
tables/surfaces. If you must put down the ESD-sensitive part for any reason, then
first place it into the ESD bag.
e-Series 6 Service Manual
2.Handling ESD-Sensitive Parts
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots UR10e Specifications

General

Brand	Universal Robots
Model	UR10e
Category	Robotics
Language	English