Description The Operational Mode Password, or mode password, creates two different user roles
on PolyScope:
•
Manual
•
Automatic
When the mode password is set, programs and installations can only be created and
edited in Manual mode. Automatic mode only allows the operator to load pre-made
programs (see 16.9 Operational Mode Selection on page134 for more information on
the modes). Once a password has been set, a new Mode icon appears in the Header.
Switching operational modes, from Manual to Automatic and from Automatic to
Manual, causes PolyScope to prompt for the new password.
To set the Mode
Password
1. In the Header, tap the Hamburger menu icon and select Settings.
2. Under Password, tap Mode.
3. Under New password, create a new password.
Creating a strong, secret password obtains the best security for your system.
4. Under Confirm new password, repeat your new password.
5. Tap Apply to confirm your password change.
25.2.3. System
Description The system settings control backup of the system, URcaps and networks settings
among other.
User Manual 339 UR10e
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
