Installation Guide for Uplogix Local Managers 4
Hardware installation
Ensure that the power source:
Provides appropriate power, AC or DC, as required by the system.
Provides overload protection
Is connected to earth ground
Warning: The power source must meet all these requirements to ensure safe and reliable
operation.
Ensure that the installation site meets the requirement that the ambient temperature does not
exceed 113° F (45° C) or fall below 32°F (0°C).
Caution: The unit will overheat if the site does not meet these requirements.
Caution: Use only the power supply shipped with the Local Manager 500. Using a different
power supply will void your warranty and may damage the equipment.
To Next Page
Loading...
