UPPAbaby MESA MAX - CARRIER INSTALLATION WITH VEHICLE SEAT BELT

42 43
BASE INSTALLATION WITH VEHICLE SEAT BELT
UNINSTALLING BASE AND STORING LOAD LEG
1 Unbuckle seat belt. Open lock-o and remove seat belt.
2 Push load leg extension release button on back of load leg and bring foot
up until it locks into place.
3 Bring load leg back into base until it clicks into secure/stowed position.
CARRIER INSTALLATION WITH VEHICLE SEAT BELT
DETERMINING BEST INSTALLATION METHOD
Carrier-only Installation can only be performed using the vehicle seat belt.
There are (3) methods of carrier-only installation.
LAP/SHOULDER PREFERRED
ROUTING METHOD
Installation with both
the lap and shoulder belt.
PAGE 45
LAP/SHOULDER OPTIONAL
ROUTING METHOD
Installation with both
the lap and shoulder belt.
PAGE 48
LAP BELT ONLY METHOD
No shoulder belt is used.
This method applies to vehicle
with no shoulder belt and aircraft.
PAGE 50
1 2 3