68 69
CARE + MAINTENANCE – Seat Padding Installation
3 While the Velcro flap is still open, adjust SIP headrest to highest position,
bring the harness straps to the front, then secure the Velcro underneath.
4 Continue to tuck fabric around the outside edges of the seat including
around the belt guides.
5 Before securing the front edge of the fabric, thread the harness adjustment
webbing through the designated slot.
6 Thread the crotch buckle through the slot then add the crotch buckle
padding.
7 Tuck the wings under the seat padding to secure. Finish by securing the
fabric around the front edge of the seat and tucking.
CARE + MAINTENANCE – SIP Padding Installation
1 Insert lower part of SIP carriage into pocket on the back of SIP padding.
2 Guide harness straps back into slots in SIP padding.
3 Secure SIP cover tightly around SIP ears.
2
1
3
75
4
6
3
To Next Page
Loading...
