Need help?Do you have a question about the Upright MX15 and is the answer not in the manual?
General| Weight | Not Available |
|---|---|
| Platform Height | 15.0 m |
| Maximum Lift Height | 15.0 m |
| Power Source | Diesel |
| Wheel Type | Solid Rubber |
Outlines the five main parts of the manual: Operator, General Info, Service, Troubleshooting, Schematics.
Essential safety precautions and warnings for operating the Aerial Work Platform.
Overview of the MX15/MX19 aerial work platform, including key components.
Identification and function of controls located on the machine chassis.
Identification and function of controls located on the operator platform.
Daily checks required before operating the machine.
Detailed steps to verify the proper operation of all machine systems.
Procedures for extending and retracting the platform deck.
Instructions for moving the machine with the platform down.
How to operate the machine's steering system.
Steps for safely raising the platform to the working height.
Manual procedure to lower the platform in emergencies.
Steps to release the parking brake mechanism for moving the machine.
Daily shutdown and securing procedures for the machine.
Procedures for lifting, forklift, and vehicle loading.
Critical safety procedure for securing the elevating assembly.
Description and testing of the machine's level sensor.
Checking fluid levels and recommended hydraulic fluid types.
Procedures for maintaining batteries and safety precautions.
Process for charging the machine's batteries and understanding indicators.
A checklist for daily and periodic maintenance tasks.
Understanding and identifying safety and operational labels on the machine.
Technical data and performance characteristics of the MX15/MX19.
Explanation of danger, warning, and caution symbols used in the manual.
Torque values for hydraulic components and fasteners.
Steps for hydraulic manifold disassembly, cleaning, and assembly.
Procedures for cylinder removal, disassembly, and assembly.
Guidelines for battery care, fluid levels, and cleaning.
Detailed description of the MX15/MX19 work platform.
Covers inspection and maintenance schedules for the machine.
Procedures for securing the elevating assembly for safe maintenance.
Maintenance, replacement, and installation of machine batteries.
Procedures for adjusting sensors and switches on the machine.
How to set and check hydraulic system pressures.
Procedures for servicing hydraulic drive motors.
Procedures for steering cylinder removal, repair, and installation.
Contact information for UpRight technical assistance.
Step-by-step guide to diagnose and resolve machine issues.
Interpretation of LED indicators for fault diagnosis.
A guide to diagnosing electrical system faults.
A guide to diagnosing hydraulic system faults.
Electrical schematics and component location diagrams.
Hydraulic schematics and component location diagrams.
To Next Page
