BY UROVO PRODUCT
Figure 5-18 code128 设置页 Figure 5-19 UPC-A 设置页
Figure 5-18 Code128 Settings Figure 5-19 UPC-A Settings
⚫ Enable : 启用
Enable: enable
⚫ L1 length : 最小长度
L1 length: minimum length
⚫ L2 length : 最大长度
L2 length: maximum length
⚫ ISBT128 : 图书码
ISBT128: book code
⚫ Send checksum : 传送校验位
Send checksum: check bit in transfer
⚫ Send system digit : 传送数字符
Send system digit: numeric character in transfer
Figure 5-20 ITF 设置页
Figure 5-20 ITF Settings
Convert to EAN-13 : 转换为 EAN-13 码
Convert to EAN-13: transfer to EAN-13 code
✓ 如果发现该设置里无您所需要设置的参数，请联系厂家技术协助修改。
If parameters needed are not found in the settings, please contact the
manufacturer's technical staff for modification.
To Next Page
