US Cutter Copam - Troubleshooting Common Issues; Cutter Communication and Responsiveness

- 47 -
Specifications
Maximum Paper Feed Width
CP-2500(24 inch model) - 24 inches (610mm)
CP-3050(35 inch model) - 36 inches (915mm)
CP-4050(48 inch model) - 48 inches (1220mm)
CP-4500(54 inch model) - 54 inches (1370mm)
Maximum Cutting Width
CP-2500(24 inch model) - 23.2 inches (592mm)
CP-3050(35 inch model) - 35 inches (890mm)
CP-4050(48 inch model) - 46.9 inches (1190mm)
CP-4500(54 inch model) - 53.2 inches (1350mm)
Cutting Speed
4-24 Inches per second (100-600 mm per second) In 4 inch per
second (100mm per second) increments
Pressure Range
50-500g In 10g increments
Maximum Cutting Thickness
.04 inches (.8mm)
Coordinate Origin
Coordinate origin specifiable
Number of Cutter/Pen
1
Standard of Blade and Holder
F2
Material
Calendared self-adhesive vinyl film, fluorescent film, reflective
film, paper card or other materials of thickness between 0.05-
0.30mm
Maximum Velocity
0.025mm/Step
Programmable Resolution
0.05mm/Step
Distance Accuracy
Within 0.15% of distance moved
Repeatability
Within 0.02mm
Command Sets
Compatible with HP-GL
Interface
Centronics parallel/RS-232 serial(auto interface recognition)
Processor/Memory
Adapt 16 bits DSP technology, 64Mb Memory
Drive
Divisional motor
Lifting and Dropping Rate
15times/sec
Acceleration
4g
Power/Consumption
110v/250v 50-60HZ. 120W(max)
Customer Service/Technical
Support Line
425-481-3555; Available 7am - 5pm, Mon-Fri
Online Technical Support
support.uscutter.com
E-mail: support@USCutter.com
Customer Forums
forum.uscutter.com
Manufactured For and Sold
Directly By
19510 114
th
Avenue NE, Suite C-1
Woodinville, WA 98072
425-481-3555 phone
888-640-0720 fax
www.USCutter.com