and your ISP's gateway address. It also contains information on the gateway's domain name
server (DNS), which maps URLs such as www.usr.com to four-number IP addresses. You
may use this page to confirm your wireless network settings and the gateway’s firmware
version before upgrading.
DSL Status
This page details specific connectivity values as directed by your ISP.
Note: If this page does not have values yet, it means that you still need to set up your
gateway. You can do this by running EasyConfigurator. (Windows users: click Start,
Programs, and U.S. Robotics EasyConfigurator. Macintosh and Linux users: double-click
on the EasyConfigurator icon on the desktop.)
Item Description
VPI/VCI
DSL connection parameters, similar to an IP
address but for an ATM network.
Con. ID
A number value indicating the order of
connection.
Category
This is the class of ATM service (UBR –
unspecified bit-rate, VBR – variable bit-rate).
Service Name
A name used to define the expected level of
service for the access concentrator. (The
default is a generic name created by the
gateway and not used.)
Interface
Name
Table entry name created by the gateway and
used only by the gateway.
Protocol
This is the authentication and encapsulation
protocol used over ATM on the ADSL
connection.
Encapsulation
Encapsulation is a set of rules for building
packets. This is the type of ATM encapsulation.
IGMP
The gateway uses the Internet Group
Management Protocol to establish host
memberships in particular multicast groups on
a single network. (One common application of
this is with a multicast video stream.)
QoS
The gateway's Quality of Service feature gives
high-priority status to certain types of packets
(defined by the user). Click here
for more
information on this.
State
This is the connection state (enabled or
disabled).
第 2 頁，共 10 頁U.S. Robotics Wireless MAXg ADSL Gateway User Guide
2005/7/4file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX13.907\wui_...
To Next Page
Loading...
