5-12
Operation on the Machine > Application
4 Press [Yes] in the confirmation screen.
Installation of the application begins. Depending on the application being installed, the installation
may take some time.
Once the installation ends, the original screen reappears.
3
Activate the application.
1 Select the desired application and press [Menu] and then [Activate].
You can view detailed information on the selected application by pressing [ ].
2 Enter the license key and press [Official].
Some applications do not require you to enter a license key. If the license key entry screen does not
appear, go to step 3-3. To use the application as a trial, press [Trial] without entering the license key.
3 Press [Yes] in the confirmation screen.
Using Applications
Icons of activated application are displayed in the Home screen. Press the application icon in the Home screen.
The application will start up.
• To install another application, repeat steps 2-3 and 2-4.
• To remove the removable memory, press [Remove Memory] and wait until the
message "Removable Memory can be safely removed." appears. Then remove the
removable memory.
If you change the date/time while using the trial version of an application, you will
no longer be able to use the application.
To Next Page
Loading...
