6-16
Using Various Functions > Functions
Combine
Combines 2 or 4 original sheets into 1 printed page. You can select the page layout and the type of boundary lines
around the pages.
The following types of the boundary lines are available.
Layout image
Item Value Description
Off ― Disables the function.
2 in 1 ― Copy the original with the default setting. For the default settings,
refer to Function Defaults on page 8-15.
4 in 1 ―
Others Combine Off,
2 in 1 (L to R/T to B),
2 in 1 (R to L/B to T),
4 in 1 (Right then Down),
4 in 1 (Left then Down),
4 in 1 (Down then Right),
4 in 1 (Down then Left)
Select the page layout of scanned originals.
Border Line None, Solid Line,
Dotted Line,
Positioning Mark
Select the boundary line type.
Original
Orientation
Top Edge on Top,
Top Edge on Left
Select the orientation of the original document top edge to scan
correct direction.
Item Image
2 in 1 L to R/T to B
R to L/B to T