5-36
Operation on the Machine > Sending
WSD scan
1
Press [Send] on the Home screen.
2
Place the originals.
3
Display the screen.
Press [WSD Scan].
4
Scan the originals.
Procedure using this machine
1 Select [From Operation Panel] and press [Next].
2 Select the destination computer and press [OK].
Press [Reload] to reload the computer list.
You can view information on the selected computer by pressing [ ].
3 Press the [Start] key.
Sending begins and the software installed on the computer is activated.
Procedure from Your Computer
1 Press [From Computer] and press [Next].
2 Use the software installed on the computer to send the images.
Loading Originals (page 5-2)
To Next Page
Loading...
