Utax P-4035i MFP

8-30
Setup and Registration (System Menu) > System Menu
WSD Scan
WSD Print
Enhanced WSD
Enhanced WSD (SSL)
Item Description
ThinPrint Select whether to use ThinPrint. When selecting [On], set the SMB default Port Number. Use
the default port 4000.
*1 *2
Value: Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
*1 The setting will be changed after restarting the device or the network for the machine.
*2 Set "SSL" to [On] in Secure Protocol on page 8-31.
ThinPrintOver
SSL
To use Thin Print over SSL, press [Thin Print over SSL] and select [On].
Value: Off, On
NOTE
When selecting [On], the certificates must be installed. For details, refer to the Embedded Web
Server RX User Guide.
Item Description
WSD Scan Select whether or not to use WSD Scan.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
Item Description
WSD Print Set whether to use our proprietary web services. WIA driver, TWAIN driver and Network FAX
driver use this Enhanced WSD web service.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
Item Description
Enhanced WSD Set whether to use our proprietary web services.
*1
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN, and Network FAX driver.
*1 The setting will be changed after restarting the device or the network for the machine.
Item Description
Enhanced WSD (SSL) Set whether to use our proprietary web services over SSL.
*1 *2
Value: Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN, and Network FAX driver.
*1 The setting will be changed after restarting the device or the network for the machine.
*2 Set "SSL" to [On] in Secure Protocol
on page 8-31.