10-18
Troubleshooting > Troubleshooting
M
Message Checkpoints Corrective Actions
Reference
Page
Machine failure. ― Internal error has occurred. Make a
note of the error code displayed on
the screen, and contact your
Service Representative.
―
Maximum number of
scanned pages.
Is the acceptable scanning count
exceeded?
Only one copy of the scanned
pages is available. Press [Continue]
to print, send or store the scanned
pages. Press [Cancel] to cancel
printing, sending or storing.
—
Memory card error. ― An error has occurred on the
memory card. Job is canceled.
Press [End].
04: Insufficient space on the
memory card to complete this
operation. Move data or delete
unneeded data.
—
Memory is full.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to Auto Error Clear
on page 8-39.
— The process cannot be performed
due to insufficient memory. The job
is canceled. Press [End].
The machine may reproduce the
same originals by arranging the
following setting:
• Decrease [Image Quality] of
[File Format].
—
— Unable to continue the job as the
memory is used up. Press
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Press
[Cancel] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
• Select [On] of RAM Disk Setting
in System Menu, and then
decrease the RAM disk size.
• Select [Printer Priority] of
Optional Memory in System
Menu.
To Next Page
Loading...
