Utax P-4035i MFP

10-23
Troubleshooting > Troubleshooting
Responding to Send Error
Error
Code
Message Corrective Actions
Reference
Page
1102 Failed to send via SMB. Check the SMB settings.
• Login user name and login password
NOTE
If the sender is a domain user, specify the domain
name.
•Host name
•Path
—
Failed to send the e-mail. Check the following on the Embedded Web Server
RX.
• SMTP login user name and login password
• POP3 login user name and login password
• E-mail size limit
—
Failed to send via FTP. Check the FTP settings.
• Login user name and login password
NOTE
If the sender is a domain user, specify the domain
name.
•Path
• Folder share permissions of the recipient
—
1103 Failed to send via SMB. Check the SMB settings.
• Login user name and login password
NOTE
If the sender is a domain user, specify the domain
name.
•Path
• Folder share permissions of the recipient
page 5-26
1132 Failed to send the e-mail. Check the following of the SMTP server.
• Is SMTP over SSL available?
• Is the encryption available?
page 2-34
Failed to send via FTP. Check the following of the FTP server.
• Is FTPS available?
• Is the encryption available?
page 2-34