MAKING A CALL THROUGH
THE CONTACT LIST
ONE-TOUCH/TWO-TOUCH DIALING
Ideal for frequently dialed numbers, this feature allows entries in your
contact list to be dialed via the keypad with only one or two key presses.
In order for One-Touch/Two-Touch Dialing to properly work, it must be
enabled.
ONE-TOUCH DIALING
2-9: Press and hold the corresponding memory number for more than 1
second.
TWO-TOUCH DIALING
10-99: Press the first digit and second digits of the memory number
short and long respectively.
3938
• If no phone number is stored in the location entered, “Empty” will
appear on the screen.
• If One Touch Dial is set to Off: Enter the speed dial location number
then press the Send Key
.
• Location 1 is reserved for voicemail. Location 2-99 are unassigned.
To assign a speed dial location, please see page 45.
Note
To Next Page
Loading...
