UTStarcom cdm7126 - Change Lock Code

SETTINGS
4. Enter the phone number and press Left Soft Key [Save] to save
it to that location.
CHANGE LOCK CODE
To change your 4-digit lock code:
1. Press Left Soft Key [Menu], then press “Settings”.
Press “Security”. Enter your password.
2. Press “Change lock code”.
3. Enter your current lock code, then enter your new lock code. Enter
your new lock code again.
ERASE DATA
To erase all data in your phone:
1. Press Left Soft Key [Menu], then press “Settings”.
Press “Security”. Enter your password.
2. Press “Erase data”.
3. Select “Erase contacts”, “Erase downloads”, “Erase voice memo”
or “Erase message”.
4. A warning message appears.
5. Select “Yes” then press to erase data in your phone.
7170
The default password is the last 4 digits of your phone number.
The default password is the last 4 digits of your phone number.