UTT Technologies Application
http://www.uttglobal.com Page 59
In Application > Configuration page, click the Save button to export and save the Device’s current
configuration to an XML file on your local computer.
2) Import Configuration File
To restore a previously saved configuration file on your local PC, click Choose File to locate and
select the configuration file, and then click Import to import the configuration file. If you select the
Reset to Factory Defaults before Restore check box, it will reset the Device to factory default
settings before importing the configuration file.
3) Reset to Factory Defaults
To reset the Device to factory default settings, click the OK button. The Device will restart
automatically.
Note:
1) To avoid any unexpected error, do not power off the Device during importing the configuration
file.
2) The reset operation will clear all custom settings on the Device. It is strongly recommended that
you backup the current configuration resetting the Device.
3) The default administrator user name and password both are admin (case sensitive). The
default LAN IP address is 192.168.1.253 with a subnet mask of 255.255.255.0.
4) After the reset operation is complete, you must restart the Device for the default settings to take
effect.
4.23 Diagnosis
On the Application > Diagnosis page, you can detect whether the Device has connected to the
other specified device.
To Next Page
Loading...