UTT Technologies Application
http://www.uttglobal.com Page 27
Memory usage: Displays the percentage of the current memory usage.
Note:
The CPU usage and Memory usage are displayed as a status bar and percentage value. The color
of the status bar indicates the usage percentage for each resource.
When the percentage is below 1%, the bar is blank.
When the percentage is above 1%, the bar is blue.
4.5 Internet
We can access to the Internet application by clicking Application > Internet or clicking at
homepage. There are three connection types: PPPoE, Static IP and Dynamic IP (Obtain an IP
automatically). Depending on which connection type you select, you will see various settings. We
will describe the settings for each connection type respectively.
4.5.1 PPPoE Connection
The Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating PPP
frames inside Ethernet frames. Some DSL-based Internet Service Providers (ISPs) use PPPoE
to establish Internet connections for end-users. If you use a DSL line, check with your ISP to
see if they use PPPoE, and then select PPPoE.
To Next Page
Loading...