12UV Smart D60 | Instructions for Use | Revision 1 US
7. Interface
The D60 interface consists of a touch screen, RFID reader, barcode scanner, speaker and (color)LEDs.
Touch screen
The touch screen is located approximately at eye-level on the front of the D60 control unit. With touch input the user can
navigate through the interface of the screen and hereby control the D60. Throughout the D60 use the D60 displays a
variety of screens and animations. Specic screens are explained throughout this Instructions for Use.
RFID reader
The RFID reader is located below the touch screen on the front of the D60 control unit. During a disinfection process,
the RFID reader facilitates traceability of equipment and ID cards equipped with RFID.
Barcode scanner
The barcode scanner is located below the RFID reader on the front of the D60 control unit. During a disinfection process,
the barcode scanner facilitates traceability of equipment and ID cards equipped with barcodes.
Speaker
The speaker is integrated into the D60 control panel and gives feedback of the D60 status during the D60 use. The
meaning behind the sounds is explained in chapter 8.
LEDs
The LEDs are integrated into the D60 disinfection area and give feedback of the D60 status during the D60 use. The
meaning behind the LEDs is explained in chapter 8.
To Next Page
Loading...
Need help?
General