31UV Smart D60 | Instructions for Use | Revision 1 US
10. UV Soft
Two congurations of the D60 are available: A connected D60 and a standalone D60. During the rst time use (setup), the
conguration selection is made by the user, depending on the user’s needs. A connected D60 is connected to the client’s
intranet, via ethernet cable. A connected D60 works together with UV Soft, UV Smart’s data logging software. This chapter
explains the use of UV Soft.
10.1. First time use
Use the following steps when UV Soft is used for the very rst time.
1. Installation, licensing and network connection
Upon D60 implementation at the client, UV Smart qualied personnel shall install the UV Soft software on the client’s
computer. This includes the licensing of the software according to your UV Smart agreement. Additionally, a UV Soft and
D60 connection to the client’s network shall be established.
2. Login
Open UV Soft. Click on one of the following tabs in the menu bar: ‘D60s’, ‘Equipment’, ‘Users’ or ‘Export’. You will be
prompted to login. Enter the following credentials and press OK.
3. Language
Navigate to the Languages-tab. Select your preferred language.
User name
Password
admin
admin
To Next Page
Loading...
Need help?
General