UV Smart D60 - Technical Specifications

41UV Smart D60 | Instructions for Use | Revision 1 US
13. Technical specications
D60 UV-C Medical Disinfection Device
Medical Disinfection Device
2
IP 20
120V-230V
50/60Hz
10A
650W
100-280nm (peak at 253.7 nm)
230V: 5A time-lag fuse (ø5x20mm) x 2
120V: 10A time-lag fuse (ø5x20mm) x 2
4A time-lag fuse (ø5x20mm) x 2
IEC/EN 60601-1-2 / 61000-3-2 / 61000-3-3
≥ 10 years
0°C - 40°C
5% - 90% (without condensation)
700hPa - 1060hPa
-20°C - 45°C
5% - 90% (without condensation)
700hPa - 1060hPa
Approximately 100kg
861mm x 2033mm x 473mm (closed)
USB
Ethernet cable
Retrievable via UV Soft and D60 internal memory
Every 12-18 months
Type of unit
Classication (acc. to IEC/EN 61010-1)
Risk Group
Ingress Protection
Voltage rating
Frequency
Amperage rating
Max. power rating
UV-C range
Fuse value
EMC
Product lifetime
Operating conditions
Temperature
Relative humidity
Atmospheric pressure
Transport and storage conditions
Temperature
Relative humidity
Atmospheric pressure
Weight
Dimensions (W x H x D)
Computer connection
IT connection type
Historical data
Technical inspection (safety check)