30UV Smart D60 | Instructions for Use | Revision 1 US
9.10. Exporting data via USB
During its lifetime the D60 collects data about its use. The following data can be exported from the D60 via the D60 display,
using a USB ash drive. Make sure to yearly backup an export of the D60 data.
Export
User data
Equipment data
Access and use log
Maintenance report
System log
Follow the instructions below to export data from the D60:
1. Navigate to the menu.
2. Press System.
3. Scan a master user ID.
4. Press USB import/export.
5. Open the D60 control panel with the corresponding key. Insert a USB ash drive.
6. Click export data.
7. Conrm by clicking the green button. To return, click the red button or the arrow in the top-left. Note that exporting data
might take a few minutes. Please wait until the export has nished.
8. When the screen indicates that data has been exported successfully it is safe to remove the USB ash drive.
1 2 3 4
5 6
7 8