vacuubrand BVC basic User Manual

page 41 of 76
NOTICE
Do not attach adhesive foil or anything similar to level sensor or to the
side of the bottle directly next to the sensor.
adhesive foil
1. Empty the bottle, decontaminate in case, clean and dry.
2. Position the bottle in the BVC.
3. Connect the bottle via hose to the pump.
4. Switch on the BVC.
➨ To shut off a false alarm prior to an adjustment, simply touch the
key marked “bottle change.” The red LED will continue to ash.
Preparation

vacuubrand BVC basic Specifications

General

Brand	vacuubrand
Model	BVC basic
Category	Water Pump
Language	English