page 67 of 76
Every employer (user) is held responsible for the health
and safety of his employees. This also applies to service
personnel performing repair, maintenance, return or cali-
bration.
The health and safety clearance form informs the con-
tractor about any possible contamination of the device and
forms the basis for the risk assessment.
In case of devices which have been in contact with
biological substances of risk level 2 contact the
VACUUBRAND service absolutely before dispatch-
ing the device. These devices have to be completely
disassembled and decontaminated by the user prior
to shipment. Do not return devices which have been
in contact biological substances of risk level 3 or
4. These devices cannot be checked, maintained or re-
paired. Also decontaminated devices must not returned to
VACUUBRAND due to a residual risk.
The same conditions apply to on-site work.
No repair, maintenance, return or calibration is possi-
ble unless the correctly completed health and safety
clearance form is returned. Devices sent are rejected
if applicable. Send a completed copy of the health and
safety clearance form to us in advance. The declaration
must arrive before the equipment. Enclose a second com-
pleted copy with the product.
Remove all components from the device that are no origi-
nal VACUUBRAND components. VACUUBRAND will not
be responsible for lost or damaged components that are
no original components.
Drain the device completely of uids and residues.
Decontaminate the device. Close all openings airtight
especially if using substances hazardous to health.
Repair - Maintenance - Return - Calibration
IMPORTANT
To Next Page
Loading...
Need help?
General
