COMMISSIONING 53
12 COMMISSIONING
12.1 Safety instructions for commissioning
12.1.1 Mechanical installation
WARNING!
Danger due to damaged products
Accidents, severe injuries as well as property damages.
► Never install damaged products. Report damages immediately to the transport
company.
NOTICE!
Danger due to connection to wrong mains voltage
Damage or destruction of the device.
► The control system must only be installed if the information on the nameplate of
the control system agrees with the information for the mains voltage.
TIPS AND RECOMMENDATIONS!
Information about the installation location
It is intended that the installation location of the control system (EHB vehicle, skids,
etc.) contributes to the further minimization of dangers (mechanical/electrical).
Design the installation location in such a way that
a distance as large as possible exists between control system and persons,
no edges can damage the cabling,
etc.
To Next Page
Loading...