DISASSEMBLY AND DISPOSAL 92
18 DISASSEMBLY AND DISPOSAL
18.1 Preparation for disassembly
• Switch off the system and secure it against switching back on.
• Physically disconnect the entire power supply from the system.
• Loosen and remove all screws.
DANGER!
Danger of death due to electrical current!
Contact with live parts can result in life-threating injuries.
► Make sure that the relevant components are not live or under voltage, and that
there is no unauthorized approximation.
18.1.1 Disassembly
During disassembly, always observe the information in section 4.3.1 .
WARNING!
Risk of death from improper replacement or removal!
Errors during the removal or replacement of components may cause life-threatening
situations or significant property damage
► Observe the safety instructions before beginning any removal work.
CAUTION!
All accessories must be checked for wear.
Only defect-free parts may be reused.
► Use only genuine VAHLE spare parts.
To Next Page
Loading...