Vahle DCS1-PCB - 13.2.3 Parameter: Rail bus control


CONFIGURATION/PARAMETERIZATION 72

13.2.3 Parameter: Rail bus control
Parameter: “Speed settings”
Parameter Selection Description
Speed (= 0) 0 This value is always 0 (value cannot be changed).
Speed 1 ... 9 0 ... 1200Hz/10 -
Associated accelera-
tion ramp speed 0 ...
9
0 ... 255 Hz/s -
Associated decelera-
tion ramp speed
0 ... 9
0 ... 255 Hz/s -
Emergency stop delay
ramp (fast braking in
case of error)
0 ... 255 Hz/s -