User's Guide ______________________________________________________________________
34 __________________________________________________________________ M210566EN-J
0804-083
Figure 17 Panel Mounting Dimensions (mm/inch)
Wiring
Cable Bushings
A single electrical cable with screen and three to ten wires is
recommended for power and analog/serial connections. The cable
diameter should be 8 ... 11 mm. The number of cable bushings depends
on the transmitter options. See the following recommendations for the
cable bushings:
0503-010
Figure 18 Cable Bushings
The following numbers refer to Figure 18 above:
1 =
Cable for signal/powering Ø8 ... 11 mm
2 = Cable for optional module Ø8 ... 11 mm
3 = Cable for optional power supply module Ø8 ... 11 mm
To Next Page
Loading...
