User's Guide ________________________________________________________
10 _____________________________________________________ M210283en-A
Special safety precautions are not needed, because the
device is powered by a low voltage. The following general
safety precautions must, however, be observed during all
phases of installation work and repair of this equipment.
Failure to comply with these precautions or with specific
warnings elsewhere in this manual violates safety standards
of design, manufacture, and intended use of the equipment.
Vaisala and its subsidiaries assume no liability for the
customer's failure to comply with these requirements. Note
the following precautions:
WARNING
To prevent operator injury or damage to the background
luminance and host visibility sensors, verify that the line
voltage setting is correct before connecting the line power.
Also ensure that the line power outlet is provided with a
protective ground contact.
WARNING
Do not operate the equipment in the presence of flammable
gases or fumes. Operation of any electrical instrument in
such an environment constitutes a definite safety hazard.
CAUTION
Because of the danger of introducing additional hazards, do
not install unsuitable parts to the instrument. Contact
Vaisala or its authorized representative for repairs to ensure
that safety features are maintained.
To Next Page
Loading...
Need help?
General
