User's Guide ________________________________________________________
18 _____________________________________________________ M210283en-A
0205-013
Figure 2 Mounting LM21 on the Option Support Arm
of FS11
Installation to FS11 Visibility Sensor
The LM21 sensor is mounted on the FS11 Option Support
Arm, which is attached to the rear panel of the interface unit
radiation shield. The mechanical installation of LM21 on the
Option Support Arm including the cabling are shown in
Figure 3 on page 20. Figure 4 on page 21 shows the wiring
of LM21 into the interface unit of FS11.
To Next Page
Loading...
