Need help?Do you have a question about the Vaisala WMT703 and is the answer not in the manual?
General| Product Type | Wind Sensor |
|---|---|
| Wind Speed Range | 0 to 60 m/s |
| Operating Temperature | -40 to +60 °C |
| Power Supply | 9 ... 30 VDC |
| Measurement Principle | Ultrasonic |
| Operating temperature range | -40 to +60 °C |
| Protection class | IP66 |
| Wind Direction Range | 0 to 360 degrees |
| Output | RS-485 |
| Accuracy Wind Speed | ±0.3 m/s |
| Accuracy Wind Direction | ±3 degrees |
| Measurement range | 0 to 60 m/s |
| Dimensions | 160 mm |
| Weight | 1.5 kg |
Covers essential safety precautions and warnings for operating the WMT700 sensor, including electrical and physical hazards.
Provides a comprehensive overview of the Vaisala WINDCAP Ultrasonic Wind Sensor WMT700, its features, and benefits.
Explains the ultrasonic sensor technology used by WMT700 for accurate wind speed and direction measurement.
Guidance on choosing an optimal site for accurate ambient wind measurements, considering surrounding objects.
Step-by-step instructions for mounting, aligning, and connecting the WMT700 sensor and its components.
Procedures for correctly orienting the WMT700 sensor using its markings for accurate wind direction readings.
Information on connecting the WMT700 sensor using various cable types and connector pin-outs.
Explains the two serial communication ports (COM2 and COM1) and their capabilities for data transfer.
Covers the configuration, types, and scaling of analog outputs for wind speed (AOUT1) and direction (AOUT2).
Lists common problems, their probable causes, and suggested remedies for the WMT700 sensor.
To Next Page
