Chapter 4 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 39
1005-004
Figure 14 WMT700 Sensor Handling
Unpacking Instructions
WMT700 is shipped in a cardboard custom container with plastic
transportation dampers. One of the dampers protects the wind sensor
body, while the other shields the array and the transducers. See Figure 15
on page 40.
When unpacking the wind sensor, remove the transportation damper that
protects the sensor body. To avoid bending or twisting the array, do not
remove the damper protecting the array until you have installed
WMT700. Figure 15 on page 40 shows the damper protecting the array.
Retain all original packaging in case you have to return WMT700 to
Vaisala Service Center for maintenance purposes. WMT700 is
uninstalled by performing the steps of the mounting procedure in reverse
order.
To Next Page
Loading...
