Vaisala LM21 - Figure 11 Connecting the Signal and Power Cable into LMM101

User's Guide ________________________________________________________
44 _____________________________________________________ M210283en-A
0207-005
Figure 11 Connecting the Signal and Power Cable into
LMM101
The following numbers refer to Figure 11 above:
1 = Cable gland
2 = Calibrator connector
3 = Empty connector slots
5. Gently insert the new LMM101 assembly, right side
(the connector side) first, into the measurement head
and check that the gasket sits properly between the
cover frame assembly and the measurement head.