Figure 18 RFL100 device properties in viewLinc
Local alarms on the RFL100 are also managed remotely, but in a dierent way. See Alarm
indicators (page 16).
viewLinc automatically issues calibration reminder notifications at 3 months and 1
month before to the due date, and again on the due date. These reminders are not
shown locally on the data logger.
4.4 Releasing RFL100 from viewLinc Monitoring
System
After RFL100 data logger has been accepted to a viewLinc Monitoring System by a viewLinc
Enterprise Server administrator, it will not connect to any other system unless first released
from its current system. There are two ways to release the data logger:
• Locally by pressing its Release button
• Remotely from viewLinc Enterprise Server software
RFL100 User Guide M211861EN-D
34
To Next Page
Loading...