4.5.1 Connecting probe to Insight software
Figure 20 Connecting probe to insight
• Computer with Microsoft Windowsâ operating system and Vaisala Insight
software installed
• USB connection cable (order code 219690)
1. Disconnect the probe from the data logger.
2. Open Insight software.
3. Connect the USB cable to a free USB port on the PC or USB hub.
4. Connect the probe to the USB cable.
5. Wait for Insight software to detect the probe.
More information
‣
Probe replacement (page 39)
Chapter 4 – Operation
37
To Next Page
Loading...