VAKI Micro - Warranty Information

Manual for VAKI Micro/Macro
Page 4
2 Warranty
VAKI Aquaculture Systems Ltd. offers warranty for and manufacturing defects that appear within
one (1) year from the date of delivery from VAKI Iceland, on condition that the equipment has been
assembled, used and maintained in accordance with the instructions for assembly and use.
Changes to the start date of this warranty, such as delayed delivery to the user, must be
reported to VAKI upon receipt of the equipment and agreed in writing.
VAKI undertakes to repair all defects that are due to faults in the design, materials used, or
manufacture of the equipment. These defects will be rectified by repairing the equipment, or
replacing components. The customer may be required to return the complete unit or parts thereof
to the factory in Iceland for repair.
VAKI accepts corresponding warranty for original parts fitted by VAKI as replacements, for a
period of one (1) year from the date supplied.
VAKI will not be liable for:
 Incorrect assembly and use, or inadequate maintenance
 Defects which result from the fitting of materials, components or devices not supplied
by VAKI, and which are purchased and fitted by the user.
 Defects due to changes made to the equipment by the user, without the written
consent of VAKI.
 Faulty or inadequate repairs carried out by the user.
 Normal wear and tear of the equipment.
 Faulty connection of electrical equipment
 Faults caused by excessive voltage.
 Damage or stoppage due to immersion of the computer or camera in water.
 Damage to electrical supply cables.
 Any economic loss that my arise from production stoppage.