10
Installer - READ THIS FIRST!
1. YOU NEED TO KNOW FROM THE HOMEOWNER:
• What accessories (surround, screen, ZC kit, etc.)
will be installed
2. Unpack the appliance, removing all items packed
inside and around it. Recycle the packaging.
3. Check that you have everything, using the Pack Con-
tent sheet. Also, check that you have:
• Fuel bed (packed separately)
• Liner panels (packed separately)
• Optional accessories (if ordered)
• Gas conversion kit (if necessary)
• Venting accessories
4. Carefully read the Installer’s Checklist included with
the fi replace for the installation sequence.
Caution
Only qualified, licensed, or trained personnel
should install this appliance.
Installation Planning
Before Installation
To Next Page
Loading...
