Vanderbilt VR4 S-MF Series User Manual

5 Mounting and connecting
5 Mounting and connecting
The reader enables two different mounting alternatives: surface mounted and back box
mounted. Those come in two different varieties, depending on how the wires are fed or
which kind of back box is used. The reader is delivered with components to support
the two mounting alternatives. Please note that the alternatives only require some of
the different components. Before mounting the reader, identify the parts which are
needed for the appropriate alternative.
Please refer to respective page for:
l "Surface mounted reader" on the next page– the reader is mounted on the base,
which first is fastened on a wall.
l "Surface mounted reader with cables fed from outside" on page11 – the reader is
mounted on the base and the cables are connected via one of the knock outs.
l "Back box mounted reader " on page13 – the reader is partly mounted inside a
back box in a wall. The two extra screws prevent the reader from rotating.
l "Back box mounted reader with adapter plate " on page14 – The reader is partly
mounted inside a square back box and an adapter plate is used to widen the area
for mounting the reader.
For connecting the cables to the reader, please refer to:
l "Connecting the cables" on page15.
9
Vanderbilt International (IRL) Ltd. 2017-04-12

Vanderbilt VR4 S-MF Series Specifications

General

Brand	Vanderbilt
Model	VR4 S-MF Series
Category	Card Reader
Language	English