Need help?Do you have a question about the Vantage Controls STAT and is the answer not in the manual?
General| Model | STAT |
|---|---|
| Power Input | 20-30 Vac (24 Vac nominal), 60/50Hz |
| Power Draw Typical | 9.80 mA rms – This value is with 24 VAC input voltage and backlight OFF |
| Power Draw Maximum | 36.40 mA rms – This value is with 18 VAC input voltage and backlight ON |
| Rated Output Current | 0.001 A to 1 A continuous per output with up to 5 A surge (half cycle) |
| Typical Control Accuracy | ± 1°F at 68°F / ± 0.5°C at 20°C |
Weight and Dimensions| Dimensions HWD | 4.85” x 3.875” x 1” / 123.2mm x 98.4mm x 25.4mm |
|---|---|
| Weight | 6.9oz / 195.6g |
Explains button functions, scroll wheel, and main display for user interaction.
How to switch between OCCUPIED and UNOCCUPIED temperature settings.
Explains operation modes like AUTO, HEAT, COOL, OFF, and EMERG.
Guidelines for physical installation of the thermostat and sensors.
Wiring diagrams for conventional and heat pump systems.
Procedures to test conventional HVAC outputs and expected results.
Procedures to test heat-pump HVAC outputs and expected results.
Detailed procedure for removing old and installing new thermostats.
Connecting power and external sensors to the new thermostat.
To Next Page