Page 9
Temperature Hold
This thermostat lets you temporarily make the temperature warmer or cooler, without affecting the
pre-set programming. Pre-set programming refers to Occupied and Unoccupied set points.
If the user password is not required, or a valid password was entered, you can set a permanent
hold. The thermostat will hold the TARGET temperature permanently and display HOLD.
If the user password is required and a valid password has not been entered you can only set a one
hour timed hold. The thermostat will hold the TARGET temperature for one hour and display TIMED
HOLD.
Touch the
SCROLL
to view this screen.
Set the desired temperature using the
SCROLL
.
Touch the
LEFT TAB
to ENGAGE HOLD, or
RIGHT TAB
to CANCEL
and return to the Main Menu.
To cancel a HOLD, touch any of the buttons to return to this screen. Use the RIGHT TAB to
CANCEL HOLD.
To Next Page
Loading...