Page 12
Temperature Settings
A SETPOINT is defined by a NAME, and HEAT & COOL temperature.
Ex: If the SETPOINT is set to OCCUPIED, the thermostat operating in AUTO mode will keep your
dwelling’s temperature at the predefined HEAT or COOL temperature. In the summer, the
thermostat will COOL your dwelling down to 78ºF. In the fall, the thermostat will engage the HEAT
mode, heating your dwelling up to 70ºF through the winter. In the spring, the temperature will rise
again and the thermostat will change back to COOL mode.
The SETPOINT’s HEAT and COOL temperature can be changed in the SETPOINTS menu.
Choose SETPOINTS from the Main Menu.
To change the HEAT and COOL temperature settings,
SCROLL
to
the SETPOINT you want to change and touch
SELECT
.
SCROLL to change the temperature, or touch SELECT to move
between the HEAT and COOL settings.
Touch the LEFT TAB to ACCEPT temperature changes.
To Next Page
Loading...