VAT 670 Series - Page 28

MAINTENANCE Series
670
28/39 Edition 2018-06-19 943070EA
Description
Required tool
11. Fasten the actuator screws by hand
Allen wrench
4mm
12. Fasten the actuator screws with
8Nm
Allen torque
wrench
4mm
13. Connect the power cables
Take care to the connector
position at actuators, refer to
3 dots at connector for
correct connection.
Pozidriv
screwdriver No.1
The plate is not installed for
the next steps!
14. Switch ON the power supply.