Vatech EzRay Air Wall - Manufacturers Liability; Owner and Operators Obligations

1. General and Regulatory Information
EzRay Air Wall (VEX-S300W) User Manual 1
ENGLISH
1. General and Regulatory Information
1.1 Manufacturer's Liability
The manufacturers and retailers of this equipment assume responsibility for the safe
and normal operation of this product only when:
 Genuine VATECH approved equipment and components have always been used.
 A VATECH authorized agent has performed all maintenance and repairs.
 The equipment has been used normally following the user's manual.
 The equipment damage or malfunction is not the result of an error on the part of
the owner or operator.
1.2 Owner and Operator's Obligations
 The owner of this equipment shall perform constancy tests at regular intervals to
ensure patient and operator safety. These tests must be performed following local
X-ray safety regulations.
 The owner of this equipment shall perform regular inspection and maintenance of
the mechanical and electrical components of this equipment to ensure safe and
consistent operation (IEC 60601-1).
 The owner of this equipment shall ensure inspection and cleaning work is
performed following the maintenance schedule outlined in Chapter 6 User
Maintenance.