Vatech EzRay Air Wall - Cleaning and Disinfection

7. Cleaning and Disinfection
EzRay Air Wall (VEX-S300W) User Manual 43
ENGLISH
7. Cleaning and Disinfection
The liquid can cause damage to the equipment. When
cleaning or disinfecting, liquids may enter the equipment
or the release button via the ventilation slots.
 Do not spray the equipment with Cleaners or
disinfectant agents. Apply the Cleaners or
disinfectant agents to a clean cloth and wipe it.
 Make sure that no liquids run along the surface into
the ventilation slots or release button.
 Remove any soiling with a soft, wet, lint-free cloth.
 Please follow the Cleaners or disinfectant agents’
instructions for use.
 When cleaning or disinfect the surfaces, always
disconnect the equipment from mains.
 Do not use spray cleaner or disinfectant directly
onto the equipment, as this could cause a fire.
 Cleaners or disinfectant agents may contain powerful ingredients. Unsuitable
cleaning and disinfectant agents are detrimental to health and attack the surface
of the equipment.
 Do not use cleaners or disinfectant agents containing Phenol, acetic acid,
peroxide, or other oxygen splitting agents, sodium hypochlorite, isopropyl alcohol
(2-propanol, isopropanol) or iodine- splitting agents.
 Comply with the specifications contained in the operating instructions of the
Cleaners or disinfectant agents.
 Wear safety gloves.