To Next Page

To Previous Page

3. Warnings and Precautions

Green Smart User Manual 13

ENGLISH

3.2 Electricity-related Safety Precautions

To avoid the risk of electric shock, this equipment must only be

connected to supply mains with protective earth.

 Check the status of the power source, PC, and cables prior to operating the

equipment.

 Ensure that Main Power Switch is set to off when the equipment is not in use.

 Always disconnect the power supply before cleaning the equipment.

 Always keep electrical cords away from hot appliances or radiators.

 DO NOT place the PC or peripheral equipment connected to the PC near the patient.

 The equipment and PC should be connected to common protective earth.

 Never overload the equipment’s circuit by sharing it with too many appliances.

 Use the same power circuit for the PC and the equipment.

Combining this equipment with other devices

 Do not connect this equipment to devices which are not designated as a part of the

system.

 Do not connect this equipment to a Multiple Portable Socket-Outlet (MPSO) or

extension cord which is not provided with the equipment.

Electromagnetic compatibility

 This X-ray equipment complies with IEC standard 60601-1-2.

 Medical electrical equipment is subject to special Electromagnetic Compatibility

(EMC) preventive measures. It must be installed and operated as specified in EMC

information.

 If high-voltage systems, radio link systems or MRI systems are located within 5 m of

the unit, please observe the specifications stated in the installation requirements.

 Portable Radio Frequency (RF) communications equipment may interfere with

medical electrical equipment. Therefore, the use of mobile wireless phones in

medical offices or hospital environments must be prohibited.

 For more details, refer to 15.3 Electromagnetic Compatibility (EMC) Information.

 Please also observe the Electro-Static Discharge (ESD) protective measures

described.

Vatech GREEN SMART User Manual

Questions and Answers: