Vatech GREEN SMART - Maintenance

12. Cleaning and Maintenance
132 Green Smart User Manual
12.2 Maintenance
VATEC H requires periodic constancy tests to ensure image quality and the safety of the
patient and the operator.
Only VAT ECH-authorized technicians can perform inspection and service for the
equipment. For technical assistance, contact VATEC H service center or your local
VATEC H representative.
12.2.1 Regular Maintenance
 Always turn off the equipment before performing any maintenance.
 Never remove equipment covers. There are no repairable parts
inside.
 The only parts that can be replaced by the user are the input fuses,
which must comply with the manufacturer’s specifications.
 As a precaution against fire, the replacement should be one in the
same type and range.
 There are no user serviceable parts inside this equipment.
 If any service is required, please contact the VATECH service
center or your local VATEC H representative.
 Do not unplug cables by force.
 Do not expose the equipment or components in an area which is susceptible to water
or humidity.
 Do not expose the equipment in an area of extreme fluctuation in temperature, poor
ventilation, direct sunlight, dust, salt, etc.
 Keep all detachable components well organized and clean.
 Make sure that the equipment is well grounded.
 Never try to modify this equipment, including the wires or cables. Doing so may
damage it beyond repair.