VATECH Co., Ltd.
Release
V2.0.0
PaX-500
14
④ X-ray Setting Control Button
Adjust kVp, tube voltage value and mA, tube current value.
⑤ Select Pateint Button
Select the patient per gender (Man, Woman, Child) and bone density (Hard, Normal, Soft).
⑥ Panorama Property Button
Select Standard or Special Mode.
(Select various kinds of imaging mode depending on selection of each mode.)
⑦ Select Panorama Imaging Mode Button
Standard mode - Panoramic, Left, Front, Right, TMJ open, TMJ Close, Sinus are
available for selection.
Special mode - Maxillary clear, Canal clear, Incisor clear, Orthogonal are available for
selection.
⑧ Select Arch Button
Normal, Wide, Narrow, Child are available for selection.
⑨ Lamp Button
Turn the lamp On/Off for alignment of pateints.
⑩ Select Imaging Mode Button
Select one of imaging mode such as Panorama or Cephalo.
⑪ Confirm Button
Confirm the current setting (press the Confirm Button after making all the necessary
settings)
⑫ Ready Button
Perform imaging according to instruction message after clicking Ready Button.
⑬ Imaging, Image Processing Status Bar (Progress bar)
Show the progress status with a graph at the time of imaging and image processing.
⑭ Exit Button
Exit the imaging program.
To Next Page
Loading...
